|
 |
 |
| |
 |
Condensation Particle Counters |
|
|
| |
Cesstech offers a variety of condensation particle counters from HCT for measurement of nanoparticles from
cleanroom applications to measurement of such particles from exhausts of diesel vehicles . These CPCs use
either n-butyl alcohol or DI water as a working fluid with great flexibility to adapt to the different industrial
environments . HCT also offers other associated instruments and devices such as the Diiferential Mobility
Analyzer (DMA), Air samplers & collectors, Particle sizers and a soft X-ray bipolar charger . These products can
be used in semiconductor, microelectronics, data storage and the pharmaceutical industries as well as in the
automotive and research institutions . |
|
|
| |
|
|
|
| |
 |
Model CPC 4322/4323
Condensation Particle Counter |
| The HCT #4322/4323 CPC is used for measuring nano particles concentration easily and simply using DI water as a working fluid - suitable for cleanroom applications where real-time monitoring of airborne particles is critically important . It can detect particles down to 10nm @ flow rate of 2.83 l/min (0.1cfm). |
| |
| Features : |
|
 |
Fast response |
|
|
High flow rate (Max. 0.1cfm) |
|
|
Achieves a linear response to particle concentration from
1 to 104 #/cm3 with R2 >0.99 |
|
|
Uses water as condensing fluid |
|
|
Compatible with SMPS systems |
|
|
Detects particles down to 7 nm |
|
|
Clean environment monitoring
|
|
|
|
|
|
| |
|
|
|
| |
 |
Model CPC 4312
Condensation Particle Counter |
| The HCT #4312 CPC is used for measuring nano particles concentration easily and simply using n-buyyl alcohol as a working fluid. |
| |
| Features : |
|
|
7 nm sensitivity at 1.0 L/min aerosol flow rate |
|
|
Measures particle concentrations up to 104 particles/cm3 |
|
|
Built-in touch LCD and computer |
|
|
USB and Ethemet available |
|
|
Built-in SMPS compatibility (optional) |
|
|
Particle concentration, total counts, or instrument status shown on front-panel LCD display |
|
|
|
|
|
| |
|
|
|
| |
 |
Model CPC 4312P
Condensation Particle Counter |
The #4312P CPC fully meets all proposed PMP (Particle Measurement Program) requirements for Euro V regulations . This CPC can measure and provide information on diesel particles and diesel particle formation for vehicles using diesel as a fuel source.
|
|
|
|
| |
|
|
| |
|
|
|
| |
 |
Model DMA 4210/4220
Different Mobility Analyser |
The DMA is used to measure particle size distributions in the sub-micron and nanometer size ranges . It can be applied in a variety of aerosol studies, including the classification of mono-dispersed aerosol particles and the measurement of submicron aerosol size distributions.
|
|
|
|
| |
|
|
|
| |
 |
Model EPS 4410
Electrical Particle Sizer |
The EPS 4410 adopts a powerful and useful technique for measuring quasi-real time nano particles in almost any environment . The EPS consists of an aerosol charger,
a Differential Mobility Analyzer (DMA) and a Condensation Particle Counter (CPC) or Aerosol Electrometer . Suitable for present day aerosol & atmospheric research and other
industrial application.
|
|
|
|
| |
|
|
|
| |
 |
Model 4530
Soft X-ray Bipolar Charger |
The HCT Soft X ray Bipolar charger 4530 can neutralize charges present on nanometer aerosol particles using soft X-ray photoionization and can be used as a replacement radioactive source for other traditional radioactive sources such as AM241, Kr35 or Po210. This method improves measurement efficiency.
|
|
|
|
| |
|
|
| |
|
|
|
| |
 |
Model 4640
Air Sampler |
| The HCT #4640 Air Sampler is a portable and energy-efficient wet concentrator air sampler suitable for collection of bioaerosol, particulate matter, soluble vapours (including submicron-sized particles, airborne molecular contaminants (AMC), biological particulates and volatile / semivolatile chemical compounds) . It is lightweight, easy to operate and provides you with necessary but critical information on contamination sources in your workplace provides.
|
|
|
|
| |
|
|
|
| |
 |
Model 4650
Nano Particle Collector |
The HCT #4650 Nano Particle Collector is used to sample positively charged aerosol nano particles in critical research applications . It is lightweight, easy to operateand can sample particle sizes of between 2 to 200 nm . Typical applications include particle sampling in Cleanroom environments or collection of samples for measurement on SEM or AFM for
nano-particle evaluation.
|
|
|
|
| |
|
|
| |
 |
|
| |
 |
| |
